M1 GARAND REBUILD PACKAGE DEALS FOR REBUILDING YOUR M1 Why DGR? Only Dean’s Gun Restorations (DGR) offers each customer the opportunity to select their type and finish of stock sets, (Maple, Bastogne Hybrid Walnut, American Walnut and Claro & T-1 or T-2 finishes) has the industries best Mil-Spec Parkerizing, uses new springs, uses to spec or rebuilt op rods, and new stock & hand guard metal when building/rebuilding an M1. Selecting your own stock set is not only fun, it guarantees you no one else will have exactly the same! Instead of your M1 being a “cookie cutter” production line (all the same type) M1; with DGR it will be a “one off”, (no other like it exists). You can either select from a few stock sets we try to keep on hand or select from photos of blanks before the stock set is cut by the manufacture. You will now add your own personal touch to your M1. I (Dean) have been Parkerizing for 24 years now. I do not believe there is anyone in this business that produces better Parkerizing and pays attention to detail like DGR. There is a great deal more to Parkerizing then just getting “color” but that information is a guarded secret. The value of new springs is missed by few and we feel, why perform all the other work and have the M1 fail because new springs were not installed. Just does not make sense to me and is border line stupid to use old springs, in my opinion. Using an in spec or rebuilt op rod is usually not understood. This is a huge advantage over others that are willing to use minimal spec op rods which can dismount from the receiver and/or cause failures with the rifle's gas system. DGR exceeds military specs when dealing with op rods. There are accuracy steps that DGR (trade secrets) makes to assure the best accuracy from your M1. One of these steps only cost $8 but I never see my competition making this addition. Plus any accuracy steps we take are John C. Garand match approved. So if you are looking for a new M1 or wanting your M1 rebuilt, DGR is the only one that can give you a look/quality unequaled by others. Dean-DGR More about Stock Sets... click here If sending a rifle in for one of our packaged deals, please fill out the printable page found on our "Billing & Shipping" page of our website. This printable page is designed to supply DGR with all the needed information and you can print out a "back-up" copy to keep for your records! Read the July 2007 Precision Shooting article written about M1s that DGR builds: CLICK HERE Also read the August 2010 article in Precision Shooting Magazine regarding testing of new barrels BARREL TESTING Video Produced By Customer Video A New Properly Fitted Stock Set Can Amount To 40% Of A Rifles Accuracy Complete Package Deals Include: New Stock Set Of Your Choice DGR's Mil-Spec Parkerizing New Criterion Barrel. Mini Package Deals Include: New Stock Set Of Your Choice DGR's Mil-Spec Parkerizing 90 day payment plan is now available for DGR package deals also! Add A New Barrel And The Accuracy Issue Is Now Up To The Shooter COMPLETE (includes a new barrel) M1 GARAND PACKAGE DEAL WITH EXTRA FANCY GRADE ENGLISH WALNUT, CLARO WALNUT, BASTOGNE HYBRID WALNUT, AMERICAN WALNUT, MAPLE AND ENGLISH WALNUT STOCK SET $1429.00 COMPLETE (includes a new barrel) M1 GARAND PACKAGE DEAL WITH STANDARD AMERICAN WALNUT STOCK SET $759.00 COMPLETE (includes a new barrel) PACKAGE DEAL WITH SEMI-FANCY WALNUT STOCK SET ...OR... MINI PACKAGE DEAL WITH NEW SEMI-FANCY WALNUT STOCK SET $859.00 $565.00 MINI M1 GARAND PACKAGE DEAL WITH EXTRA FANCY GRADE CLARO, BASTOGNE HYBRID, AMERICAN WALNUT, MAPLE AND ENGLISH WALNUT STOCK SETS $1135.00 MINI M1 GARAND PACKAGE DEAL WITH STANDARD AMERICAN WALNUT STOCK SET $465.00 M1 Tanker! (Click on above pictures to enlarge, then hit the back button to return) DGR built M1 tankers with the original length 18 1/4" new Criterion barrel. Since the late 1960s tankers have been commercially made and all modified parts were made for the 18 1/4" barrel. That means you can find replacement parts from other sources. If you deviate from the 18 1/4" barrel you will be restricted to purchasing replacement parts (op rod, follower rod and etc.) from a single supplier. This is one reason I decided to only use the 18 1/4" barrel. The 18 1/4" barrel has always been the standard length all parts were designed around. The DGR Tanker Includes New Criterion barrel in either 30-06, 7.62 MM or .308 New stock set with DGR's hand rubbed oil finishes New stock and hand guard metal Rebuilt op rod with new piston and stud New springs New Mil-Spec Parkerizing and finishing of the gas cylinder parts 1 year warranty Add $355 for the tanker version to the Complete package deal prices listed above, (does not include the Mini package deals). Thanks, Dean-DGR UltiMak M1 & M1 carbine scope mounts! M1 Garand, Model M12 Mount...$185.00 M1 Carbine, Model M6-B...$93.00 Perfect for intermediate eye relief scopes or dot sights Clamps to barrel for perfect alignment Solid, hard anodized with 4140 steel clamps. (This is the main feature that sets this mount apart from others in Dean's opinion. The screws and brackets they screw into are steel where on other models the steel screws attach to the aluminum mount.) (The picture above shows the mount painted to match the gas cylinder. The mounts come to us with black anodizing and blued strapping parts. DGR recommends the mount be painted with our colored bake on lacquer to match the gas cylinder and the steel parts be Parkerized. Additional cost for this service is $18.00) (Now on the DGR order form) Back In Stock! New M1 Stock and Hand Guard Metal! $45.00 (Click On Picture To Enlarge) DGR now offers new stock and hand guard metal with any of our M1 package deals. Now Available! New Black Hills Ammo for the M1! New match grade ammo specifically designed for the M1 Garand. 168 gr Hornady A-Max bullet that launches at 2900-2950 feet per second and provides match winning accuracy. Carefully designed medium burn propellants to protect the rifle's gas port system, allowing safe and accurate firing of the M1 rifle (30-06) and meets all SAAMI guidelines. Case Price (100 rounds)...$174.00 DGR's Authentication Stamp DGR has 3/4" or 1/2" stamps that can be stamped into your new wood to authenticate that your rifle was re-built by DGR. Stamps are only applied upon customers request. CLICK HERE TO SEE FINISHED EXAMPLES OF M1'S WITH DIFFERENT WOOD TYPES/FINISHES. Give Us a Call At 423-562-2010. All prices subject to change without notice. Discover, Visa & MasterCard, money orders and personal checks are accepted. All orders are subject to a 3% processing fee. Licensed & Insured FFL Dealer, Member of the GCA and Life Member of the NRA. NOTICE: If you send DGR a firearm and later cancel, there is a $45 per firearm administrative fee that will be added to the return shipping. This is for the required book keeping of our ATF repair log. How to Contact Us: Dean's Gun Restorations 452 Jane Way Lane Jacksboro, TN 37757 Office Hours: Monday - Friday 9:00 AM - 4:00 PM Eastern Time Telephone: (423) 562-2010 Dean's Email: dean-dgr@comcast.net "LIFE'S TOO SHORT TO SHOOT AN UGLY GUN!" * Please feel free to email any questions or suggestions * RETURN TO TOP
M1 GARAND REBUILD PACKAGE DEALS
FOR REBUILDING YOUR M1
Why DGR?
Only Dean’s Gun Restorations (DGR) offers each customer the opportunity to select their type and finish of stock sets, (Maple, Bastogne Hybrid Walnut, American Walnut and Claro & T-1 or T-2 finishes) has the industries best Mil-Spec Parkerizing, uses new springs, uses to spec or rebuilt op rods, and new stock & hand guard metal when building/rebuilding an M1.
Selecting your own stock set is not only fun, it guarantees you no one else will have exactly the same! Instead of your M1 being a “cookie cutter” production line (all the same type) M1; with DGR it will be a “one off”, (no other like it exists). You can either select from a few stock sets we try to keep on hand or select from photos of blanks before the stock set is cut by the manufacture. You will now add your own personal touch to your M1.
I (Dean) have been Parkerizing for 24 years now. I do not believe there is anyone in this business that produces better Parkerizing and pays attention to detail like DGR. There is a great deal more to Parkerizing then just getting “color” but that information is a guarded secret.
The value of new springs is missed by few and we feel, why perform all the other work and have the M1 fail because new springs were not installed. Just does not make sense to me and is border line stupid to use old springs, in my opinion.
Using an in spec or rebuilt op rod is usually not understood. This is a huge advantage over others that are willing to use minimal spec op rods which can dismount from the receiver and/or cause failures with the rifle's gas system. DGR exceeds military specs when dealing with op rods.
There are accuracy steps that DGR (trade secrets) makes to assure the best accuracy from your M1. One of these steps only cost $8 but I never see my competition making this addition. Plus any accuracy steps we take are John C. Garand match approved. So if you are looking for a new M1 or wanting your M1 rebuilt, DGR is the only one that can give you a look/quality unequaled by others.
Dean-DGR
More about Stock Sets... click here
If sending a rifle in for one of our packaged deals, please fill out the printable page found on our "Billing & Shipping" page of our website. This printable page is designed to supply DGR with all the needed information and you can print out a "back-up" copy to keep for your records!
Read the July 2007 Precision Shooting article written about M1s that DGR builds:
CLICK HERE
Also read the August 2010 article in Precision Shooting Magazine regarding testing of new barrels
BARREL TESTING
Video Produced By Customer
Video
A New Properly Fitted Stock Set Can Amount To 40% Of A Rifles Accuracy
Complete Package Deals Include:
New Stock Set Of Your Choice
DGR's Mil-Spec Parkerizing
New Criterion Barrel.
Mini Package Deals Include:
90 day payment plan is now available for DGR package deals also!
Add A New Barrel And The Accuracy Issue Is Now Up To The Shooter
COMPLETE (includes a new barrel) M1 GARAND PACKAGE DEAL WITH EXTRA FANCY GRADE ENGLISH WALNUT, CLARO WALNUT, BASTOGNE HYBRID WALNUT, AMERICAN WALNUT, MAPLE AND ENGLISH WALNUT STOCK SET
COMPLETE (includes a new barrel) M1 GARAND PACKAGE DEAL WITH STANDARD AMERICAN WALNUT STOCK SET
$759.00
COMPLETE (includes a new barrel) PACKAGE DEAL WITH SEMI-FANCY WALNUT STOCK SET
...OR...
MINI PACKAGE DEAL WITH NEW SEMI-FANCY WALNUT STOCK SET
$565.00
MINI M1 GARAND PACKAGE DEAL WITH EXTRA FANCY GRADE CLARO, BASTOGNE HYBRID, AMERICAN WALNUT, MAPLE AND ENGLISH WALNUT STOCK SETS
MINI M1 GARAND PACKAGE DEAL WITH STANDARD AMERICAN WALNUT STOCK SET
M1 Tanker!
(Click on above pictures to enlarge, then hit the back button to return)
DGR built M1 tankers with the original length 18 1/4" new Criterion barrel. Since the late 1960s tankers have been commercially made and all modified parts were made for the 18 1/4" barrel. That means you can find replacement parts from other sources. If you deviate from the 18 1/4" barrel you will be restricted to purchasing replacement parts (op rod, follower rod and etc.) from a single supplier. This is one reason I decided to only use the 18 1/4" barrel. The 18 1/4" barrel has always been the standard length all parts were designed around.
The DGR Tanker Includes
New Criterion barrel in either 30-06, 7.62 MM or .308
New stock set with DGR's hand rubbed oil finishes
New stock and hand guard metal
Rebuilt op rod with new piston and stud
New springs
New Mil-Spec Parkerizing and finishing of the gas cylinder parts
1 year warranty
Add $355 for the tanker version to the Complete package deal prices listed above, (does not include the Mini package deals).
Thanks, Dean-DGR
UltiMak M1 & M1 carbine scope mounts!
M1 Garand, Model M12 Mount...$185.00
M1 Carbine, Model M6-B...$93.00
Perfect for intermediate eye relief scopes or dot sights
Clamps to barrel for perfect alignment
Solid, hard anodized with 4140 steel clamps. (This is the main feature that sets this mount apart from others in Dean's opinion. The screws and brackets they screw into are steel where on other models the steel screws attach to the aluminum mount.)
(The picture above shows the mount painted to match the gas cylinder. The mounts come to us with black anodizing and blued strapping parts. DGR recommends the mount be painted with our colored bake on lacquer to match the gas cylinder and the steel parts be Parkerized. Additional cost for this service is $18.00)
(Now on the DGR order form)
Back In Stock!
New M1 Stock and Hand Guard Metal!
$45.00
(Click On Picture To Enlarge)
DGR now offers new stock and hand guard metal with any of our M1 package deals.
Now Available!
New Black Hills Ammo for the M1!
New match grade ammo specifically designed for the M1 Garand. 168 gr Hornady A-Max bullet that launches at 2900-2950 feet per second and provides match winning accuracy. Carefully designed medium burn propellants to protect the rifle's gas port system, allowing safe and accurate firing of the M1 rifle (30-06) and meets all SAAMI guidelines.
Case Price (100 rounds)...$174.00
DGR's Authentication Stamp
DGR has 3/4" or 1/2" stamps that can be stamped into your new wood to authenticate that your rifle was re-built by DGR. Stamps are only applied upon customers request.
CLICK HERE TO SEE FINISHED EXAMPLES OF M1'S WITH DIFFERENT WOOD TYPES/FINISHES.
Give Us a Call At 423-562-2010.
All prices subject to change without notice.
Discover, Visa & MasterCard, money orders and personal checks are accepted. All orders are subject to a 3% processing fee.
Licensed & Insured FFL Dealer, Member of the GCA and Life Member of the NRA.
NOTICE:
If you send DGR a firearm and later cancel, there is a $45 per firearm administrative fee that will be added to the return shipping. This is for the required book keeping of our ATF repair log.
How to Contact Us:
* Please feel free to email any questions or suggestions *
RETURN TO TOP